Need help?Do you have a question about the MaxTronic Orion 410ST and is the answer not in the manual?
General| Brand | MaxTronic |
|---|---|
| Model | Orion 410ST |
| Category | Network Storage Server |
| Language | English |
Step-by-step instructions for initializing the Orion 410ST NAS System.
Instructions on how to connect the power cord to the NAS system and outlet.
Procedures for turning the Orion 410ST on and off correctly.
Steps to connect the Orion 410ST to the network using a LAN cable.
Detailed steps for installing hard disk drives for the first time.
Instructions on handling HDD caddies, locking, and hot-plugging precautions.
Identifies the buttons and LEDs on the front control panel.
Explains the operation of Up, Down, Enter, and Escape buttons.
Details the meaning of the Power and Network Status LEDs.
Explains the status indicated by the LEDs on each HDD caddy.
Describes the automatic self-configuration performed during system boot-up.
Lists the system information that can be configured via the front panel.
Steps to log in using the administrator password.
Outlines the main menu structure and its sub-items (Network, System, Misc).
How to check the status of the network connection (CH0).
Steps to manually set the IP address for the network interface.
How to set the subnet mask for the network interface.
Steps to configure the gateway address for network access.
How to enable or disable the DHCP client status.
Instructions for setting the system date.
Instructions for setting the system time.
Procedures for rebooting or shutting down the NAS system.
Steps to change the administrator password for enhanced security.
How to reset the administrator password using the serial number.
Procedures to restore the system to its original factory default settings.
Steps to access and log into the Orion 410ST's web-based user interface.
Shows detailed information about the NAS system.
Displays all configured network settings and status.
Displays details about installed HDDs and their status.
Displays system events with color-coded information, warnings, and errors.
How to change the default server name to a custom name.
Manual and NTP-based date and time configuration.
Steps to modify IP address, subnet mask, and other network parameters.
How to apply network configuration changes by rebooting the system.
Steps to create new storage volumes using single disk or RAID configurations.
How to set the user level for workgroup, server description, and WINS.
To Next Page