10 11
MULTIFUNCTION
FUNCTIONS
- Analogue - 3 hands
- 24 hour
- Day and date
To set the time:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all
other styles go to step 3
3. Pull the crown out to position ‘C’
4. Turn the crown clockwise to move the hands to the
correct time
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position
(see SCREW DOWN CROWN INSTRUCTIONS)
Note: The 24 hour indicator requires no adjustment. It
changes automatically when changing the time.
To set the day:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all
other styles go to step 3
3. Pull the crown out to position ‘C’
4. Turn the crown clockwise and advance 24 hours to
change day
5. Push the crown back to position ‘A’, or
6. Screw the crown back to its original position (see
SCREW DOWN CROWN INSTRUCTIONS)
Note: The day changes every 24 hours automatically
during the period from about 1.00am to 3.00am.
To set the date:
1. Make sure your watch is completely dry
2. For gents and Waverider styles only, unscrew the crown
(see SCREW DOWN CROWN INSTRUCTIONS), for all
other styles go to step 3
3. Pull the crown out to position ‘B’
4. Turn the crown clockwise to correct date
5. Push the crown back to position ‘A’, or
To Next Page
Loading...