Maxwell 3 - User Manual

Maxwell 3 - Sennheiser DW Series
Introduction
Here we describe how the Sennheiser DW Series are connected to the Maxwell 3.
Connecting Base Station to the Maxwell
Use a normal 8 pin Ethernet cable (17)
Connect to the Sennheiser Base station socket.(8)Phone
Connect to the Maxwell 3 socket (6).EHS
Sennheiser DIP switch settings
Set the DIP switch and to the lower position.1 4
Adjusting the audio signal
Set the switch (6) to (Default), or so that you can hear a clear signal.ABC A B C

Maxwell 3 Specifications

General

Brand	Maxwell
Model	3
Category	Measuring Instruments
Language	English

Summary

Introduction

Connecting Base Station

Ethernet Cable Connection

Connect using an 8-pin Ethernet cable to the Sennheiser Base station Phone socket.

Maxwell 3 EHS Socket Connection

Connect to the Maxwell 3 EHS socket using the appropriate cable.

Sennheiser DIP Switch Settings

DIP Switch Configuration

Set DIP switches 1 and 4 to the lower position for optimal settings.

Adjusting Audio Signal

ABC Switch Adjustment

Set the ABC switch to A (Default), B, or C to ensure a clear audio signal.

Adjusting Microphone Sensitivity

Microphone Volume Control

Adjust the microphone volume control to change the input sensitivity.