MAXWORKS 80699 - Use of the Tumbler Composter; Limited Warranty; Assembling and Using the Tumbler Composter

Model 80699 Page 3
Personal and Work Area Safety (continued)
F. While assembling and using the Tum-
bler Composter, keep work area clean
and well lighted. Keep spectators and
children out of the work area.
3. Use of the Tumbler Composter
A. Do not modify this product and do not
use this product for purposes that it was not
designed for.
B. This product is designed to cure food
scraps and other household waste into com-
post. Compost adds nutrients and organic
matter back to the soil which benets agri-
culture, reduces the need for fertilizers and
improves the soil’s water retention.
C. This product is not
a toy and should be located in an area away
from children and out of reach of children.
Small hardware components such as bolts
and nuts can be accidently swallowed by
children at play.
D. Complete assembly of this product is
required. If you are not experienced or
capable of doing this type of assembly work
safely, the Tumbler Composter should be
assembled by qualied service technicians.
This product is best assembled by two
people.
E. Save packaging information, warnings
and this manual. They contain important in-
formation and must always remain readable.
Contact MAXWORKS for replacements.
Keep in mind that the warnings previous-
ly discussed cannot cover all possible
conditions or situations that could occur.
It is important that the person setting up
and using this product understand that
common sense and caution are factors
which cannot be built into this product,
and must be supplied by the person(s)
using this product.
Limited Warranty
MAXWORKS warrants to the original retail
purchaser that the product is free of defects
in material and workmanship at the time of
shipment. This Tumbler Composter is war-
ranteed for 90 days from the date of pur-
chase. This warranty is expressly in lieu of
all other warranties, express or implied.
Proof of purchase is required for warranty
transactions; a copy of the original invoice
or sales receipt is required.
Assembling and Using the Tumbler
Composter
Always wear ANSI approved
safety goggles when assembling
this product.
Refer to the photos below and on Pages 4
and 5 when assembling the Tumbler Com-
poster.
A. Read and adhere to all Personal and
Work Area Safety Warnings on pages 2 and
3 before assembling and using this product.
B. Find a convenient and safe working area
(away from children and pets) for the assem-
bly of this product.
WARNING
C. Lay out and identify all components.
Note that the 2 longer Bolts with matching
Nuts are used to secure the Tumbler to the
Stand (this will be last assembly step).
Stand
Long Bolt
with Nut
Long Bolt
with Nut
(hidden
from
view)