Assembling the XPW-239 & XPW-240
Inflate the boat by airing up the
two Leafield valves on the XPW-
239. (One on the XPW-240)
Remove the valve cover cap.
Depress the spring-loaded
centerpin in the center of the
valve and give it ¼ clockwise turn
until it rises. Attach pump and
inflate. Leave the centerpin in
this position during use. Inflate to
approximately 6.5 psi/0.45 bar, or
simply - until nearly all of the
wrinkles are out of the boat.
To deflate, press the centerpin
and turn counter-clockwise ¼
turn until it seats deeper into the
heart of the valve.
To Next Page
Loading...