MAXXTOW 70355 User Manual

Read and understand this entire manual before installing and
using this product.
SAVE THIS MANUAL
Instruction Manual
Functions 1-1/4” Hitch Adapter
with 4-1/2” rise; 2” x 2”
Receiver for accesso-
res (bike rack or cargo
carrier). 6-1/2” distance
between pin holes.
Maximum Weight Rating
350 Lb. Tongue Weight*
Top Hitch Receiver Not For Towing
Hitch Pins Required -
Steel with R-Shaped Safe-
ty Clip (not included)
1/2” Diameter for hitch
connection;
5/8”diameter for
accessory connection.
*Tongue Weight refers to a combination of the
amount of the trailer’s weight that presses down
on the trailer hitch, and the weight of the accesso-
ry and its load. Example: If a cargo carrier and it’s
load (total weight = 150 Lbs.) is to be connected to
the upper receiver, the maximum additional tongue
weight that can press down on the trailer hitch is
200 Lbs. The combination of these two tongue
weights should not exceed 350 Lbs.
1-1/4” to 2”
Hitch Adapter
with
4-1/2” Rise
Model 70355
Specications
WARNING
Too much tongue weight can lower the tow vehicle in back, result-
ing in traction, steering and braking problems.
Too little tongue weight can reduce rear wheel traction, resulting
in instability, swaying or jackkning.
For proper handling, tongue weight should be under 10% of the
Gross Trailer Weight (GTW).
Do not exceed the maximum weight ratings shown in the Speci-
cations table.
Do not exceed the rating of the lowest rated component in the
vehicle/trailer towing set-up.
Copyright
c
2013 by MAXXTOW. All rights reserved. No portion of this manual or any artwork contained herein may be repro-
duced in any shape or form without the express written consent of MAXXTOW. Due to continuing improvements, actual prod-
uct may differ slightly from the product described herein. Tools required for assembly and maintenance may not be included.

MAXXTOW 70355 Specifications

General

Brand	MAXXTOW
Model	70355
Category	Automobile Accessories
Language	English

Summary

Important Safety Information

Definition of Symbols

Explains warning symbols used in the manual for potential hazards and their meanings.

Important Safety Instructions

Guidelines for understanding and following safety warnings, instructions, and personal/work area safety.

Unpacking

Instructions for inspecting the product shipment for damage or shortages upon receipt.

Use of the Hitch Adapter

Weight Ratings and Connection

Advises not to exceed weight ratings and ensure secure connections for safe operation.

Safety Precautions for Installation

Details pre-installation steps like engine off, emergency brake, and chocking wheels.

Accessory Attachment

Specifies how to attach accessories using the upper receiver and required pins.

Dynamic Loading Awareness

Warns about the danger of dynamic loading and its potential for damage and injury.

Pre-Use Inspection

Instructs to check the hitch adapter, vehicle receiver, and accessory for secure hardware.

Setting Up the Hitch Adapter

Securing Hitch Adapter to Vehicle

Details using a 1/2" hitch pin and safety clip to secure the adapter's shank to the vehicle receiver.

Attaching Accessories

Explains using a 5/8" hitch pin and safety clip for accessories to the upper receiver.

Compatibility and Manufacturer Guidelines

Emphasizes reading guidelines from vehicle receiver and accessory manufacturers.