Stand 36-1824 English page 7 of 7
The thread can get damaged.
When the top plate is not on the lower anchor tube, sand may get washed into
the flanks of the thread. As sand is harder than steel, the thread may get
damaged when the screw is turned.
4. If you have two or more sunshades, it is advisable to mark them and their accessories
(e.g. with metal-stamped numerals or using a waterproof marker) as soon as they have
been dismounted (e.g. for winter storage).
Marking saves a lot of time and helps to keep things in order.
If clearly marked, each sunshade can easily be assigned to its proper location
and re-erected parallel to the wall of the house or next to the others.
For clear and easy later assignment use the same number to mark the centre
pole, the upper anchor tube and the lower anchor tube. For example, for
sunshade No. 1, all three parts should carry number 1, all three parts of
sunshade No. 2 should be marked with a 2, etc.
5. Grease the screws regularly to prevent them from rusting.
counter-sunk screw, M6x12mm (3)
To Previous Page
Loading...