Mayku Multiplier - Page 13

23
Installation and User Instructions22
Mayku Multiplier
UK declaration of conformity
The undersigned, representing the following:
Manufacturer and the authorised
representative
established within the
Great Britain Area:
Company name:
Mayku Limited
Address: The Biscuit
Factory, Unit J410, Jam
Studios, 100 Drummond
Road, London, United
Kingdom, SE16 4DG
herewith declare that the following machinery:
Description of machinery
Generic denomination: Multiplier
Function: Desktop pressure forming machine
Model/s: MMUA22100AA; MMUA22123UK;
MMUA22123EU; MMUA22123AU; MMUA22112US
Full the relevant provisions of Supply of Machinery
(Safety Regulations 2008, Radio Equipment
Regulations 2017 and Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012. The designated
standards and other technical specications used
in order to obtain compliance to the mentioned
regulations are the following:
BS EN 60204-1:2018 Safety of machinery - Electrical
equipment of machines - Part 1: General requirements;
BS EN ISO 12100:2010 Safety of machinery - Basic
concepts, general principles for design - Part 1: Basic
terminology, methodology;
BS EN ISO 4414:2010 Pneumatic uid power — General
rules and safety requirements for systems and their
components
BS EN ISO 13857:2019 Safety of machinery - Safety
distances to prevent hazard zones being reached by
upper and lower limbs
BS EN 349:1993 + A1:2008 Safety of machinery —
Minimum gaps to avoid crushing of parts of the human
body
BS EN IEC 61000-6-2:2019 Electromagnetic compatibility
(EMC) -- Part 6-2: Generic standards - Immunity for
industrial environments;
BS EN IEC 61000-6-4:2019 Electromagnetic compatibility
(EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments
BS EN IEC 61000-3-2:2019 + A1:2021 Electromagnetic
compatibility (EMC) Part 3-2: Limits — Limits for
harmonic current emissions (equipment input current
≤16 A per phase)
BS EN 61000-3-3:2013 + A2:2021 + AC:2022-01
Electromagnetic compatibility (EMC) - Part 3-3: Limits
- Limitation of voltage changes, voltage uctuations
and icker in public low-voltage supply systems, for
equipment with rated current ≤16 A per phase and not
subject to conditional connection
ETSI BS EN 301 489-1 V2.2.3 Electromagnetic
compatibility and Radio spectrum Matters (ERM);
Electro Magnetic Compatibility (EMC) standard
for radio equipment and services; Part 1: Common
technical requirements
ETSI BS EN 301 489-3 V2.1.1 Electromagnetic
compatibility and Radio spectrum Matters (ERM);
Electro Magnetic Compatibility (EMC) standard
for radio equipment and services; Part 3: Specic
conditions for Short-Range Devices (SRD) operating on
frequencies between 9 kHz and 40 GHz
ETSI BS EN 301 489-17 V3.2.4 Electromagnetic
compatibility and Radio spectrum Matters (ERM);
Electro Magnetic Compatibility (EMC) standard for
radio equipment; Part 17: Specic conditions for 2,4
GHz wideband transmission systems, 5 GHz high
performance RLAN equipment and 5,8 GHz Broadband
Data Transmitting Systems
ETSI BS EN 300 328 V2.2.2 Wideband transmission
systems; Data transmission equipment operating in the
2,4 GHz band; designated standard for access to radio
spectrum
BS EN 62311:2020 Assessment of electronic and
electrical equipment related to human exposure
restrictions for electromagnetic elds (0 Hz to 300 GHz)
Name: Benjamin Redford
Position: CPO + Founder
Signature:
Place: London, UK
Date: 06.05.2022