To Next PageTo Next Page
Need help?Do you have a question about the Mayr ROBA -brake-checker plus and is the answer not in the manual?
General| Brand | Mayr |
|---|---|
| Model | ROBA -brake-checker plus |
| Category | Industrial Equipment |
| Language | English |
Confirms product meets EU directives; Declaration of Conformity can be requested.
Requires system evaluation for EMC compatibility; lab tests done for individual product.
Restricts hazardous substances in electrical and electronic devices and components.
Product is a machine component; manufacturer assesses conformity with directive.
Product not for explosion areas without classification and marking per directive.
Governs chemical substances in products; manufacturer adheres to definitions.
Explains DANGER and CAUTION signs for immediate hazards and personal injury.
Covers risk assessment, professional work, de-energised installation, and reading instructions.
Details use for ROBA®-stop safety brakes and motion monitoring features.
Explains operation, critical conditions, disconnection selection, and movement detection.
Lists electrical and environmental specifications like voltage, current, temperature, and protection.
Describes how the module detects safety-critical conditions and notifies users.
Details the numbering and function of power and control terminal connections.
Illustrates how to connect the module to a PLC and external switches.
Explains the function of inputs like F/S, Start, Digital IN, and Reset with voltage states.
Describes the function of Signal, Error, and Warn outputs with voltage states and current limits.
Covers start process, inching mode, switch-on/off, and voltage reduction mechanisms.
Details continuous drop-out recognition, release monitoring, and possible causes for faults.
Provides MTTF values, duration of use, cycle frequency graph, and time delays.
Specifies product application, WEEE directive compliance, and fuse installation guidelines.
Emphasizes that EMC compliance requires integration with the load and the complete system.
Lists measures for separate line routing, shielding, grounding, and avoiding antenna effects.
Presents diagrams illustrating timing parameters and lists various time delays.
Provides formulas for calculating coil capacity and RMS current based on operational parameters.
Illustrates signal behavior (Start, Switch-off, Output, Signal, Error, Warn) for slow and fast switch-off modes.
Lists applicable standards, WEEE directive guidelines, and electronic component disposal methods.
Details common malfunctions, their causes, and recommended corrective measures.
