Do you have a question about the Maytag Atlantis III and is the answer not in the manual?
Describes console removal via wiring harness plug and aids diagnostic tests.
Covers Ohm meter tests for Centrifugal Switch, Overload, Water Valves, and Motor Resistance.
Explains how thermostats control water valves for precise wash temperatures in cold and warm cycles.
Procedure for accessing and removing the water valve assembly located behind the ATC.
Step-by-step guide to removing the front panel by releasing clips and screws.
Information on the pump assembly, which is fully replaced if repair is needed.
Details on unique seal and bearing for Atlantis III, warning against using older model parts.
Describes console removal via wiring harness plug and aids diagnostic tests.
Covers Ohm meter tests for Centrifugal Switch, Overload, Water Valves, and Motor Resistance.
Explains how thermostats control water valves for precise wash temperatures in cold and warm cycles.
Procedure for accessing and removing the water valve assembly located behind the ATC.
Step-by-step guide to removing the front panel by releasing clips and screws.
Information on the pump assembly, which is fully replaced if repair is needed.
Details on unique seal and bearing for Atlantis III, warning against using older model parts.












Loading...