Upper Rack The hinged shelf can be used to stack two levels
of cups, juice glasses, and other short items.
The upper rack of your dishwasher is designed Load small diameter items under shelf so
with flexibility in mind. Glasses, cups, small water will reach upper tier. When the shelf is
plates, bowls, pans, etc. can be loaded in many folded up, this area can be used for taller glasses,
different positions to suit your needs, stemware, etc.
The rack is designed so dishes can be centered
behind a single tine and held in place by the
rack's support wires. Dishes can also be loaded at
an angle to maximize space.
The upper rack may be removed if desired.
Push inward on the front of the rack rail ends to
When loading glassware, leave a small space unsnap. Remove rail ends and pull out rack.
between each piece so they do not touch each
To replace rack: reinsert rack, place rail ends in
other during the wash cycle. Do not place
position and snap fronts into place by pushing
glasses over the tines, outward.
PAGE 4
To Next Page
Loading...
