Cabin equipment
The cabin is equipped with a bottom sleeping berth, consisted of three seat pads installed on the
leg and brackets, placed behind the driver and passenger seats and upper transformed sleeping
berth. The place under the bottom sleeping berth can be used for additional heater, fridge and small
things. Closets are placed behind the seats on the right and on the left side.
In the cabin above the windscreen the clothing shelf is placed, the time clock, the heater control
block and the radio set are placed in the left side of the shelf. The shelf has three boxes for small
things and documents; the right box is used for the first-aid kit.
The cabin is equipped with two sun blinds above the windscreen, the folding antidazzling
device over the drop window at the driver side, with the circular and sleeping berth curtain, that are
used during the rest.
The cabin doors are hinged on the door aperture front leg and equipped with the rotor-type
locks, which have two closure positions: preliminary and full. During car movement the locks
should be closed. The doors are fully closed when it is possible to lock the doors on the inside with
the help of the catch button.
The place for the fire extinguisher is provided on the wall of the tool box behind the driver seat
back. The support-box, used for keeping the reservoir with drinking water, is placed on the toolbox
under the pad of the bottom sleeping berth.
Driver seat
Driver seat with the pneumatic resilient member 4 (Fig. 16) has mechanisms of horizontal and
vertical regulation, mechanism of the backrest angle regulation.
Pneumatic resilient member, controlled by the dispenser, places the seat in the prearranged
position irrespective of the driver weight. Regulation of the driver seat position is carried out by the
length change of the dispenser draw to the extent of (150±2) mm to the resilient member 4.
Mechanism of the vertical regulation -- it is the mechanism of the lever-type with the benched
fixation and it regulates the pad grade angle 2.
Mechanism of the horizontal regulation -- it is the mechanism of the sliding type with the
benched fixation.
Passenger seat can be regulated or unregulated depending on the consumer order.
Attention!
It is forbidden to regulate the seats during car movement.
To Next Page
Loading...