MAZ–631236 is a three-axle and MAZ–534035 is a two-axle chassis (see Figures 1, 2) that are
intended for mounting of different technological equipment and use on the roads where the axial
loads stated in the technical characteristics are allowed.
MAZ–650136 is a 6×4 three-axle dump-truck (see Figure 3) and MAZ–555035 is 4×2 two-axle
dump-truck with a metal body (see Figure 4) that is dumped with the help of a hydraulic mechanism
and is designed for non-metallic building, industrial and domestic bulk cargo by a single truck or
within an articulated lorry on open and special roads where the axial loads stated in the technical
characteristics are allowed.
The trucks are equipped with «Deutz» engines of Euro-4 ecological standard.
The information on power unit operation servicing (engine, clutch, gearbox) is given in separate
manufacturer-plants manuals additionally enclosed with the truck.
To Next Page
Loading...