5 The engine doesn’t cut out.
Incorrect link-up of ECS
with the electrical
equipment.
It is necessary to check the link-
up of the system with the
electrical equipment of the truck.
6.1The motor brake sensor
doesn’t work or linked-up
badly.
It is necessary to check the link-
up of the sensor with the motor
brake bundle; to change the
sensor.
6 The motor brake doesn’t
work
6.2 The motor brake valves
don’t work or linked-up
badly.
It is necessary to check the link-
up and working capacity of the
motor brake valves.
7.1 There is no connection
with the block of the antilock
system.
It is necessary to join bundle
connectors of the antilock
system and of the ECS engine.
7 The motor brake doesn’t
turn off when the antilock
system is activated.
7.2 The relay of the motor
brake is out of order.
It is necessary to change the
relay.
8 Antiskid system doesn’t
work.
There is no connection with
the block of the antilock
system.
It is necessary to join the bundle
connectors of the antilock
system and of the ECS engine.
To Next Page
Loading...