MAZ 631236 - Page 89

Amount of
lubricant
Renewal (adding)
interval
Lubrication (filling) point
Number
of
lubricati
on
(filling)
points
Main makes,
Application season
Foreign analogues (brand,
specification, company)
filling
rating
total for a
truck
Main make
Lubrication (oil filling,
change) instructions
Rate of drain
(accumulation) of used
oil
25 Front wheel hub bearings 2 0,005 kg 1,0 kg 2С
Put the lubricant in the
bearings until full filling
in of the cavities between
the rollers.
Lubricate the cover and
the inner cavity of the hub
with a thin layer.
26 Front axle steering knuckle
pivot needle bearings
4 0,02 kg 0,08 kg А Lubricate with a greaser
until fresh grease appears in
clearances
27 Spare wheel jack for
trucks with spare wheel
fastening on the dump
platform
1 0,45 kg 0,45 kg 4С Fill in with lubricant
through the greaser
28 Towing device of the
drop-side truck:
When the truck is working
with a trailer:
− rod
1 0,01 kg 0,01 kg А Lubricate with a greaser
− lifting mechanism
cavity
1 0,075 kg 0,075 kg
− protective cap
1
Lubricant Lithol-24 DIN 51502 (Germany)
MIL-G-10924C(USA)
C.S.3107B
sort XG- 279, (Eng)
Shell company:
Retinax EP2;
Mobil company:
Mobilgrease MP
Mobilux EP2/ EP3
Company: BP:
Energrease LS-EP2
Texaco company:
Multifak EP2
Esso company:
Beacon EP2
0,1 kg 0,1 kg
4С Clean the cavity from used
lubricant and dirt, put fresh
lubricant