GI
HOW TO USE THIS MANUAL/FUNDAMENTAL PROCEDURES
SYMBOLS
There are six symbols indicating oil, grease, and sealant. These symbols show the points of applying such
materials during service.
Symbol
Meaning Kind
-If
Apply oil New engine oil or gear oil as appropriate
Apply brake fluid Only brake fluid
Apply automatic transmission fluid Only ATF
Apply grease Appropriate grease
am
Apply sealant Appropriate sealant
0
Apply petroleum jelly Appropriate petroleum jelly
‘---/
OWGIX-005
Note
l
When special oil or grease is needed, this is shown in the illustration.
NOTES, CAUTIONS, AND WARNINGS
As you read through the procedures, you will come across NOTES, CAUTIONS, and WARNINGS. Each
one is there for a specific purpose. NOTES give you added information that will help you to complete a
particular procedure. CAUTIONS are given to prevent you from making an error that could damage the
vehicle. WARNINGS remind you to be especially careful in those areas where carelessness can cause per-
sonal injury. The following list contains some general WARNINGS you should follow when you work on
a vehicle.
9MUGIX-036
9MUGIX-037
FUNDAMENTAL PROCEDURES
PROTECTION OF THE VEHICLE
Always be sure to cover fenders, seats, and floor areas be-
fore starting work.
GI-4
To Next Page
Loading...
