4
–
26
When Driving
Instrument Cluster and Display
Odometer, Trip Meter and Trip
Meter Selector
The display mode can be changed from
odometer to trip meter A to trip meter B
and then back to odometer by pressing the
selector while one of them is displayed.
The selected mode will be displayed.
Digital Speed Meter Type/Analog Speed
Meter Type (Type A) instrument cluster
Press the selector
Press the selector
Press the selector
Odometer
Trip meter A
Trip meter B
Analog Speed Meter Type (Type C)
instrument cluster
Press the selector
Press the selector
Press the selector
Odometer
Trip meter A
Trip meter B
NOTE
When the ignition is switched to ACC
or off, the odometer or trip meters
cannot be displayed, however, pressing
the selector can inadvertently switch
the trip meters or reset them during an
approximate ten-minute period in the
following cases:
After the ignition is switched to off
from ON.
After the driver's door is opened.
Odometer
The odometer records the total distance
the vehicle has been driven.
To Next Page
Loading...
