9
–
19
Specifi cations
Personalisation Features
Item Feature
Factory
Setting
Available
Settings
Settings change method
Active
driving
display
Refer to
Active
Driving
Display
on page
4-35 .
Turn-by-
Turn (TBT)
Setting can be changed
so that the Turn-by-
Turn (TBT) of the
Active driving display
is not displayed.
On On/Off
Refer to
Active
Driving
Display
on page
4-35 .
—
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 Available only in display from the centre display.
To Next Page
