Mazda 2 - Page 11

When Driving
10
Lock-release button
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode when higher vehicle response is required such as merging onto
expressway or accelerating to overtake.
2. Pull the drive selection switch to the side (backward) to cancel the sport
mode.
1. Press the drive selection switch to the side (forward) to select the sport
mode.
Select Mode Indicator Light
When the sport mode is selected, the select mode indicator light turns on in the
instrument cluster.
For details, refer to Section 4, “Transaxle”.
Mazda28EC6-EE-14LEdition1QuickGuide.indb12 2014/09/2918:13:40