Mazda 2002 626 - Page 242

10-4
Form No. 8Q50-EA-01G
Specifications
▼
▼▼
▼ Engine
▼
▼▼
▼ Electrical System
*1
Manual transaxle
*2
Automatic transaxle
▼
▼▼
▼ Lubricant Quality
*
Refer to the recommended SAE viscosity numbers on 8-10.
Specifications
Model
Item
2.0-liter engine 2.5-liter engine
Type DOHC-16V in-line, 4-cyl DOHC-24V V6 6-cyl
Bore×Stroke 83.0 × 92.0mm (3.27 × 3.62 in) 84.5 × 74.2mm (3.33 × 2.92 in)
Displacement 1,991 ml (1,991 cc , 121.5 cu in) 2,496 ml (2,496 cc , 152.3 cu in)
Compression ratio 9.1 9.5
Model
Item
2.0 liter engine 2.5-liter engine
Battery Maintenance-free 12V-48AH/5HR
Alternator 12V-80A 12V-90A
Starter 12V-1.0 kW
12V-1.7 kW
*1
, 12V-1.6 kW
*2
Spark-plug
number
NGK BKR5E-11, BKR6E-11 —
DENSO K16PR-U11, K20PR-U11 PKJ16CR8, PKJ20CR8
Spark-plug gap 1.0—1.1 mm (0.040—0.043 in) 0.7—0.8 mm (0.028—0.031 in)
Lubricant Classification
Engine oil
*
API Service ILSAC
SG (Energy Conserving II) —
SH (Energy Conserving II) GF-I
SJ GF-II
SL GF-III
Manual transaxle oil
Any temperature
API Service GL-4 or GL-5
(SAE 75W-90)
Above 50°F (10°C)
API Service GL-4 or GL-5
(SAE 80W-90)
Automatic transaxle fluid
2.0-liter engine ATF M-III or equivalent (e.g. Mercon®)
2.5-liter engine ATF M-III or equivalent (e.g. Dexron® III)
Power steering fluid ATF M-III or equivalent (e.g. Dexron® II)
Brake/clutch fluid SAE J1703 or FMVSS116 DOT-3
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM