3-15
Knowing Your Mazda
Doors and Locks
Form No. 8Q42-EA-01F
▼
Fuel-Filler Cap
To remove the filler cap, turn it
counterclockwise.
To replace the filler cap, turn it clockwise
until it clicks.
▼
Opening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
2. Pull the safety catch up and lift the
hood.
Make sure the fuel-filler cap is
tightened securely. The check engine
light comes on when the cap isn’t
tightened securely. If the light remains
on (even after you have tightened the
cap securely, driven, and restarted the
engine several times), it may indicate a
different problem. Contact an
Authorized Mazda Dealer as soon as
possible.
Open
Close
CAUTION
Hood
Release handle
Safety catch
J07L_8Q42-EA-01F.book Page 15 Tuesday, March 5, 2002 3:14 PM
To Next Page
Loading...
