2-20
Essential Safety Equipment
Seats
Form No. 8Q44-EA-01K
4. Pull strap B and lift the combined
seatback and seat bottom up to vertical
with your other hand. Gently set the
seat the remainder of the way down
into the seat well.
5. Insert the head restraints between the
floor and seat at the positions indicated
on the labels.
Raising the third-row seat upright for
road use
1. Clear the entire cargo floor.
2. Remove the head restraints.
3. Carefully reverse the procedures used
to lower the seat into the seat well. Use
the handle and ease the combined
seatback and seat bottom up to vertical.
4. Carefully lower the seat forward and
make sure it’s latched to the floor.
Strap B
Labels
Handle
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM
To Next Page
Loading...
Need help?
General
