2-22
Essential Safety Equipment
Seats
Form No. 8Q44-EA-01K
To put the third-row seat in the rear
facing position:
1. Open the liftgate.
2. Clear away all cargo from the seat well.
3. Remove the head restraints.
4. Pull strap B while supporting the
seatback with the other hand and
carefully ease the seatback rearward
and into the seat well.
5. Go inside the vehicle and to the rear.
6. Remove the support bar from the
pocket.
7. Set the hook on the support bar in the
rear of the seatback.
NOTE
•
Adjust the seatback to the upright
position when the third-row seat is
facing rearward.
•
Remove cargo from the seat well
area before placing the third-row
seat in the rear-facing position.
Strap B
Support bar
Pocket
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM
To Next Page
Loading...
Need help?
General
