2-5
Essential Safety Equipment
Seats
Form No. 8R65-EA-03C
(Electrically operated seats)
Front height adjustment
To adjust the front height of the seat-
bottom, raise or lower the front of the
slide lifter switch on the left side of the
seat.
Rear height adjustment
Raise or lower the back of the switch to
adjust the rear height of the seat-bottom.
▼
Lumbar Support Adjustment
(Driver’s Seat)*
The amount of lumbar support can be
adjusted by pressing the switch.
To increase the seat firmness, press and
hold the front part of the switch to the
desired position, then release it.
Press the rear part of the switch to
increase softness.
Switch
Switch
Switch
*Some models.
J60E_8R65-EA-03C_Edition2.book Page 5 Saturday, April 26, 2003 1:48 PM
To Next Page
Loading...
