Black plate (114,1)
qHow to Arm the System
1. Remove the key from the ignition
switch.
2. Close the hood. Then close and lock all
doors and the liftgate from the outside
using the key. If you have the keyless
entry system, press the lock button on
the transmitter. The hazard warning
lights will flash once to indicate that
the system is armed.
The following method wi ll also arm the
theft-deterrent system:
Close the hood and the liftgate . Press
the area on the door-lock switch
marked “LOCK” once. Close all doors.
NOTE
Locking the doors with the inside door-
lock knob will not arm the system.
3. The indicator light flashes once every 3
seconds to indicate that the system is
fully armed. It continues to flash until
the theft-deterrent system is turned off.
qTo Turn off an Armed System
An armed system can be turned off by any
one of the following methods:
l
Unlock a door or the liftgate with the
key.
l
Press the unlock button on the keyless
entry system transmitter.
l
Insert the key into the ignitio n switch
and turn it to the ON position.
The hazard warning lights will flash twice
to indicate that the system is turned off.
qTo Stop an Alarm
A triggered alarm can be turned off by
any one of the following met hods:
l
Unlock a door or the liftgate with the
key.
l
Press the unlock button on the keyless
entry system transmitter.
NOTE
If you have any problem with the theft-
deterrent system, consult an Authorized
Mazda Dealer.
qTheft-Deterrent Labels
Labels indicating that your vehicle is
equipped with a Theft-Deterrent System
are in the glove box.
Mazda recommends that you affix them to
the lower rear corner of the front door
windows.
3-30
Knowing Your Mazda
Security System
Mazda MPV_8T50-EA-04G_Edition1 Page114
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G
To Next Page
Loading...
Need help?
General
