Black plate (128,1)
NOTE
l
If the gears cannot be shifted down
when driving at higher speeds, the
gear position indicator will flash
twice to signal that the gears cannot
be shif ted down.
l
If the automatic transaxle fluid (ATF)
temperature becomes too high, there
is the possibility that the transaxle
will switch to automatic shift mode,
canceling manual shift mode and
turning off the gear position indicator
illumination. This is a normal
function to protect the AT. After the
ATF temperature has decreased, the
gear position indicator illumination
turns back on and driving in manual
shift mode is restored.
Shifting
Manually Shifting up
(M1→M2→M3→M4→M5
*
)
To shift up to a higher gear, tap the shift
lever back (
) once.
* 2.3-liter engine model
NOTE
l
When driving slowly, the gears may
not shift up depending on vehicle
speed.
l
In manua l shift mode, gears do not
shift up automatically. Don't run the
engine with the tachometer needle in
the RED ZONE. If the tachometer
needle enters the RED ZONE, you
may feel engine-braking because the
fuel delivery will be stopp ed to
protect the engine. However, this
does not indicate an abnormality.
l
When depressing the accelerator
fully, the transaxle will shift to a
lower gear, depending on vehicle
speed.
Manually Shifting down
(M5
*
→M4→M3→M2→ M1)
To shift down to a lower gear, tap the shift
lever forward (
) once.
* 2.3-liter engine model
5-14
Driving Your Mazda
Starting and Driving
Mazda3_8U55-EA-05G_Edition2 Page128
Thursday, June 23 2005 2:53 PM
Form No.8U55-EA-05G
To Next Page
Loading...
