Black plate (162,1)
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
qHeadlight High-Low Beam
Push the lever forward for high beam.
Pull back to original position for low
beam.
High beam
Low beam
qFlashing the Headlights
To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
qHeadlight Leveling
í
The number of riders and weight of cargo
in the luggage compartment change the
angle of the headlights.
The head light leveling switch adjusts this
angle.
Select the proper setting from the following chart.
Front seat
Rear
seat
Load
Switch
Position
Driver Passenger
× ―――0
×× ―― 0
×× ×― 1
×× ××2
× ――×3
×: Yes
―:No
q
Daytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Dayt ime Running Lights turn off
when the parking brake is applied.
5-48
Driving Your Mazda
í
Some models.
Switches and Controls
Mazda3_8U55-EA-05G_Edition2 Page162
Thursday, June 23 2005 2:54 PM
Form No.8U55-EA-05G
To Next Page
Loading...
