Black plate (289,1)
CAUTION
l
A wrong-sized wheel may adversely
affect:
l
Tire fit
l
Wheel and bearing life
l
Ground clearance
l
Snow-chain clearance
l
Speedometer calibration
l
Headlight aim
l
Bumper height
l
Tire Pressure Monitoring System
l
(With Tire Pressure Monitoring
System)
l
When replacing/repairing the tires
or wheels or both, have the work
done by an Authorized Mazda
Dealer, or the tire pressure sensors
may be damaged.
l
The wheels equipped on your
Mazda are specially designed for
installation of the tire pressure
sensors. Do not use non-gen uine
wheels, otherwise it may not be
possible to install the tire pressure
sensors.
NOTE
Be sure to install the tire pressure
sensors whenever tires or wheels are
replaced. Refer to Tires and Wheels on
page 5-25.
When replacing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
Maintenance and Care
Owner Maintenance
8-41
Mazda3_8U55-EA-05G_Edition2 Page289
Thursday, June 23 2005 2:56 PM
Form No.8U55-EA-05G
To Next Page
Loading...
