Black plate (22,1)
Rear height adjustment
Raise or lower the back of the switch to
adjust the rear height of the seat-bottom.
Height adjustment
Raise the seat-bottom by pulling up on the
center of the switch. Release the switch at
the desired position .
Lower the seat-bottom by pressing down
on the center of the switch. Release the
switch at the desired position.
qHead Restraint
WARNING
Head Restraints Adjustment:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision. Always
drive with the head restraints inserted
when seats are being used and make
sure they are properly adjusted.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck.
2-10
Essential Safety Equipment
Seats
Mazda MPV_8U61-EA-05G_Edition1 Page22
Tuesday, June 21 2005 9:31 AM
Form No.8U61-EA-05G
To Next Page
Loading...
Need help?
General
