Bulletin No: 09-033/06
© 2006 Mazda Motor of America, Inc.
Last Issued: 7/21/2006
Page 2 of 5
6. Using a flat-tipped screwdriver, slide guides rearward to disengage tabs from sides of cup holder assembly
as shown.
7. Repeat for other side.
8. Carefully lift console lid and guides from cup holder assembly.
1653b
PLACE FLAT TIPPED SCREWDRIVER INT
SLOT AND SLIDE GUIDE TOWARD REAR
OF CUP HOLDER TO DISENGAGE TABS
(REPEAT FOR BOTH SIDES)
1653c
GUIDE TAB SHOWN ENGAGED
GUIDE TAB SHOWN DISENGAGED
To Next Page
Loading...
