EMISSION SYSTEM
01–16–9
01–16
• New quick release connectors are fitted with a
checker tab that prevents improper fit. This
checker tab cannot normally be removed. When
the quick release connector is properly connected
to the joint port, the lock is released and the
checker tab comes off. Due to this, it can be
verified that the quick release connector is
completely connected.
Type B
• An SST is not used with this type.
• The joint port can be disconnected by squeezing the release tab until the locking tabs release.
• To connect the quick release connector properly, push it into the joint port until a locking click sound is heard.
• New quick release connectors are fitted with a
checker tab that prevents improper fit. This
checker tab cannot normally be removed. When
the quick release connector is properly connected
to the connection point, the lock is released and
the checker tab comes off. Due to this, it can be
verified that the quick release connector is
completely connected.
JOINT PORT
CHECKER TAB
C3U0116S105
RELEASE TAB
RELEASE TAB
JOINT PORT
JOINT PORT
QUICK RELEASE
CONNECTOR
QUICK RELEASE
CONNECTOR
E5U116ZW5041
CHECKER TAB
CONNECTION POINT
EPU113ZT4610
To Next Page
Loading...
