WHEEL AND TIRES
02–12–10
Flat tire determination
• The instrument cluster determines that there is a flat tire when it receives a signal that the air pressure is lower
than the specified low-pressure value, and then it illuminates the flat tire warning light and sounds the flat tire
warning buzzer.
— The flat tire warning light turns off when the system detects that the flat tire has been repaired.
— When a flat tire is detected, the flat tire warning buzzer sounds every time the ignition switch is turned to the
ON position until recovery is detected.
— The system stores the most recent data when the power is cut (battery removal/installation) and holds this
data until the ignition switch is turned to the ON position next time.
— The system stores puncture and recovery freeze frame data.
End Of Sie
TIRE PRESSURE MONITORING SYSTEM (TPMS) WARNING LIGHT, TIRE PRESSURE MONITORING
SYSTEM (TPMS) WARNING BUZZER CONSTRUCTION
E5U021267502N03
• The TPMS warning light and the TPMS warning
buzzer are built into the instrument cluster.
• In the event of any abnormality in tire pressure or
in the system, signals illuminate the warning light
and sound the warning buzzer to alert the driver.
End Of Sie
LOW-PRESSURE AND
FLAT TIRE RECOVERY
DETERMINATION VALUE
LOW-PRESSURE
DETERMINATION VALUE
FLAT TIRE
DETERMINATION VALUE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
TPMS WARNING LIGHT
FLAT TIRE
WARNING LIGHT
FLAT TIRE
WARNING BUZZER
TPMS WARNING BUZZER
DETECTED AIR
PRESSURE
3 S
30 S
E5U212ZS5007
TPMS WARNING LIGHT
CHU0212S010
To Next Page
Loading...
