FRONT SUSPENSION
02–13–4
FRONT LOWER ARM CONSTRUCTION
E5U021334300N01
• The front lower arm is made of aluminum for rigidity and weight reduction.
• As with the front upper arm, the zero-stopper-clearance bushings optimize control over changes in vehicle
behavior.
End Of Sie
FRONT CROSSMEMBER CONSTRUCTION
E5U021334800N01
• A lightweight, highly rigid front crossmember with integrated side members has been adopted.
• The transverse member is attached to the back of the front crossmember to create a highly rigid square
construction.
• This front crossmember component is rigidly mounted to the vehicle body at eight points, providing an
extremely large amount of suspension support stiffness and alignment precision.
End Of Sie
FRONT LOWER ARM
VEHICLE FRONT
LOWER ARM BUSHING
ZERO-STOPPER-CLEARANCE
STRUCTURE
E5U213ZS5004
SIDE MEMBER
TRANSVERSE MEMBER
UNDER COVER
E5U213ZS5005
To Next Page
Loading...
