ON-BOARD DIAGNOSTIC
04–02–10
DLC-2 CONSTRUCTION
E5U040243750N06
• A connector (DLC-2) conforming to International Organization for Standardization (ISO) standards has been
added.
• Shape and terminal arrangement as stipulated by the ISO 15031-3 (SAE J1962) international standard has
been adopted for this connector. The connector has a 16-pin construction that includes the CAN_H (HS),
CAN_L (HS), GND1, GND2 and B+ terminals.
End Of Sie
Terminal Function
CAN_L (HS) Serial communication Lo terminal (HS)
CAN_H (HS) Serial communication Hi terminal (HS)
GND1 Body ground terminal
GND2 Serial communication ground terminal
B+ Battery power supply terminal
DLC-2
B+
CAN_L
(HS)
CAN_H
(HS)
GND2 GND1
E5U402ZS5002
To Next Page
Loading...
