DYNAMIC STABILITY CONTROL
04–15–18
DSC INDICATOR LIGHT OPERATION
E5U041555430N02
• When the DSC and CAN lines are normal, the DSC indicator light illuminates for approx. 3 s when the ignition
switch is turned to the ON position to check the light function. When the system is malfunctioning, the DSC
indicator light remains illuminated.
• When the DSC or TCS is operating (DSC has not been disabled by pressing the DSC OFF switch), the DSC
indicator light operates as follows:
DSC Indicator Light Operation
End Of Sie
DSC OFF SWITCH, DSC OFF LIGHT FUNCTION
E5U041566410N01
• The DSC OFF switch, located on the dashboard, allows for optionally enabling/disabling the DSC control at
driver discretion.
• The DSC OFF light, built into the instrument cluster, informs the driver that DSC control has been disabled by
operation of the DSC OFF switch.
End Of Sie
DSC OFF SWITCH, DSC OFF LIGHT OPERATION
E5U041566410N02
• When the DSC system and CAN lines are functionally normally, the DSC OFF light illuminates for approx. 1.8
s when the ignition switch is turned to the ON position to check the light function.
• When the DSC OFF switch is pressed to disable DSC control, the DSC OFF light illuminates.
Note
• When releasing the DSC, continue to press the DSC OFF switch until the DSC OFF light illuminates.
End Of Sie
Item DSC indicator light condition
TCS, DSC not operating Not illuminated
TCS operating
Flashes (0.5 s intervals)
DSC operating
BRAKE
DSC INDICATOR LIGHT
E5U415ZS5015
BRAKE
DSC OFF LIGHT
DSC OFF SWITCH
E5U415ZS5016
To Next Page
Loading...
