Mazda 2006 MX-5 - Refrigerant Lines Construction

BASIC SYSTEM
07–11–6
REFRIGERANT LINES CONSTRUCTION
E5U071161460N01
• Aluminum alloy has been adopted for the pipes of the refrigerant lines and rubber (flexible hoses) has been
adopted for the hoses.
• A high-pressure charging valve is installed on cooler pipe No.2, and a low-pressure charging valve is installed
on the cooler pipe No.3.
End Of Sie
COOLER HOSE (HI)
COOLER PIPE No.2
HIGH-PRESSURE CHARGING VALVE
LOW-PRESSURE CHARGING VALVE
COOLER HOSE (LO)
COOLER PIPE No.1
COOLER PIPE No.3
E5U711ZS5010