Mazda 2006 MX-5 - Autostop Function; One-Touch Wiper Operation

WIPER/WASHER SYSTEM
09–19–3
09–19
Autostop Function
• While the wipers are operating, the autostop switch remains on except when the wipers are in the park position.
Current flows through the INT relay to the wiper switch, wiper motor, then to ground. Thus, the wipers continue
to operate until they reach the park position even if the wiper switch moves to the OFF position.
One-touch Wiper Operation
• When the wiper lever is pushed up, the one-touch switch turns on, and current flows through the one-touch
switch to the wiper motor, then to ground. The wipers operate at low speed for one cycle.
• While the wiper lever is pushed up and held, the wipers operate continuously at low speed. When the wiper
lever is released, the autostop function activates and the wipers stop at the park position.
IG1
INT
RELAY
AUTOSTOP
SWITCH
INT
INT
OFF
OFF
1
1
2
2
WASHER
SWITCH
WIPER SWITCH
WIPER
MOTOR
WASHER
MOTOR
ONE-TOUCH
SWITCH
E5U919ZS5004
IG1
INT
RELAY
AUTOSTOP
SWITCH
INT
INT
OFF
OFF
1
1
2
2
WASHER
SWITCH
WIPER SWITCH
WIPER
MOTOR
WASHER
MOTOR
ONE-TOUCH
SWITCH
E5U919ZS5005