Mazda 2006 MX-5 - Intermittent Wiper Operation; Synchronized Washer and Wiper Operation; Washer Tank Specification

WIPER/WASHER SYSTEM
09–19–4
Intermittent Wiper Operation
• When the wiper switch moves to the INT position, the intermittent wiper (INT) relay turns on, and current flows
through the INT relay to the wiper switch, wiper motor, then to ground. The wipers operate at low speed.
• When the preset period of time has passed, the INT relay turns off. The current stops flowing through the wiper
motor. The autostop function activates, and the wipers stop at the park position. Cycling through this sequence
of operations, the wipers operate at specified intervals.
• The INT volume provides optional settings of the wiper sweep interval (timing that the INT relay turns from off to
on).
Synchronized Washer And Wiper Operation
• When the wiper lever is pulled toward the driver, the washer switch turns on and current (1) flows through the
washer switch to the washer motor, then to ground. The washer motor activates and washer fluid is sprayed.
• At the same time, the INT relay turns on, and current (2) flows through the INT relay to the wiper switch, the
wiper motor, then to ground. The wipers operate at low speed.
End Of Sie
WASHER TANK SPECIFICATION
E5U091967480N01
End Of Sie
IG1
INT
RELAY
AUTOSTOP
SWITCH
INT
INT
OFF
OFF
1
1
2
2
WASHER
SWITCH
WIPER SWITCH
WIPER
MOTOR
WASHER
MOTOR
ONE-TOUCH
SWITCH
E5U919ZS5006
IG1
INT
RELAY
AUTOSTOP
SWITCH
INT
INT
OFF
OFF
1
1
2
2
WASHER
SWITCH
WIPER SWITCH
WIPER
MOTOR
WASHER
MOTOR
ONE-TOUCH
SWITCH
(2)
(1)
E5U919ZS5007
Item Standard type Large type
Washer tank capacity 1.2 L {1.3 US qt, 1.1 Imp qt} 4.5 L {4.8 US qt, 4.0 Imp qt}