ENTERTAINMENT
09–20–10
ON-BOARD DIAGNOSTIC SYSTEM FUNCTION
E5U092066900N05
Self-diagnostic Function
Malfunction detection function
• The malfunction detection section detects malfunctions occurring in the system.
Memory function
• The memory function detects a malfunction, changes it to a DTC, and stores it in the memory. The memory can
store a maximum of three DTCs. If another malfunction is detected when three DTCs are already stored, the
memory function clears the oldest DTC and stores the new one.
• Once a DTC is stored, it can only be cleared by the designated procedure; not by turning the ignition switch to
the LOCK position or disconnecting the negative battery cable. The procedure is mentioned in the Service
Section.
Display function
• When the self-diagnostic function is activated, the information display displays the DTC stored in the memory.
• The DTC consists of the following codes and numbers:
— Supplier code (indicates manufacturer)
— Part number (indicates malfunctioning part)
— Error code (indicates malfunction description)
• Refer to the Service Section for the display method.
1 Supplier code
2 Part number
3 Error code
Supplier code Supplier name
1 SANYO Automedia
2 Panasonic
3Clarion
4 Pioneer
Parts number Parts name
03 CD player
05 CD changer (external)
06 CD changer (upper module)
07 MD player (lower module)
09 Base unit
10 MP3 applicable CD player
11 Sirius unit
21 Center panel
22 MP3 applicable CD changer
Error code Malfunction description
01 Internal mechanism error
02 Servo mechanism error
03 Mechanism stuck
04 Tape malfunction
07 Disc reading error
08 Blank media
10 BUS line (communication line) error
17 Incorrect combination
18 Incorrect combination
19 Communication line
20 Insufficient power supply
21 Amplifier related circuit
22 Tuner error
3
1
2
E5U920ZS5201
To Next Page
Loading...
