LUBRICATION
01–11–2
LUBRICATION SYSTEM FLOW DIAGRAM [LF]
E5U011100000N03
End Of Sie
OIL FILTER CONSTRUCTION [LF]
E5 U0111143 00 N0 1
• The oil filter component is installed on the left surface (vehicle left) of the cylinder block.
• An aluminum oil filter adapter has been adopted for weight reduction. The oil pressure switch is installed on the
rear of the oil filter adapter.
• The oil filter is a full-flow paper element type with an outer diameter of 76.2 mm {3.00 in} and height of 94.0 mm
{3.70 in}.
End Of Sie
CAMSHAFT
TAPPET
ORIFICE
OIL PRESSURE SWITCH
OIL FILTER
OIL PUMP
OIL STRAINER
MAIN BEARING
CRANKSHAFT
OIL PAN
TIMING CHAIN
CHAIN TENSIONER
CONNECTING ROD
BEARING
PISTON
OIL JET VALVE
OIL PASSAGE
OIL RELIEF PASSAGE
OCV
VARIABLE VALVE
TIMING ACTUATOR
TO OIL PAN
OIL BYPASS PASSAGE
E5U111ZS5002
GASKET
OIL FILTER ADAPTER
OIL PRESSURE
SWITCH
OIL FILTER
EXTERNAL VIEW
HEIGHT
OUTER
DIAMETER
E5U111ZS5003
To Next Page
Loading...
