Black plate (207,1)
NOTE
l
If the ignition switch is turned off during a
hands-free call, the line is transferred to the
mobile telephone automatically.
l
If the mobile telephone is in a location
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth. If
communication is not possible, change the
location of the mobile telephone.
qComponent parts
Bluetooth Hands-Free consists of the
following parts:
l
Voice Recognition/Hands-Free switch
l
Information display
l
Microphone
l
Audio unit/Navigation system
Voice Recognition/Hands-Free switch
Basic functions of Bluetooth Hands-Free
can be used such as making calls or
hanging up using the voice recognition/
hands-free switch on the steering whee l.
Voice recognition/hands
-
free switch (Phone button)
Voice Recognition/Hands-Free switch
operations
A short press or a long press of the voice
recognition/hand s-free switch is used
depending on the operation status as
follows:
l
Short press (Press the button less than
0.7 sec.)
l
Long press (Press the button 0.7 sec. or
more.)
Information display
Telephone numbers, Bluetooth Hands-
Free messages, and operation status are
displayed.
Microphone
The microphone is used for inputting
voice commands or exchanging
conversation.
Microphone
Interior Comfort
Bluetooth Hands-Free
6-45
Mazda5_8X53-EA-07I_Edition1 Page207
Monday, September 3 2007 10:41 AM
Form No.8X53-EA-07I
To Next Page