Black plate (141,1)
Before Getting In
l
Be sure the windows, outside mirrors,
and outside lights are clean.
l
Inspect inflation pressures and
condition of tires.
l
Look under the vehicle for any sign of
fluid leaks.
l
If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutch fluid,
washer fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.
After Getting In
l
Are all doors closed and locked?
l
Is the seat adjusted properly?
l
Are the inside and outside mirrors
adjusted?
l
Is each occupant 's seat belt fastened?
l
Check all gauges.
l
Check all warning lights when the
ignition switch is turned to the ON
position.
l
Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly famili ar with your
Mazda.
Before Driving Your Mazda
Before Starting the Engine
4-5
MX-5_8X49-EA-07F_Edition2 Page141
Monday, June 25 2007 11:18 AM
Form No.8X49-EA-07F
To Next Page
Loading...
