Black plate (382,1)
Rear
CAUTION
The cap cannot be completely
removed. Do no t use excessive force
as it may damage the cap or scratch
the painted bumper surface.
NOTE
If it is difficult to remove the tiedown eyelet,
wrap the jack lever with a cloth as shown in
the figure and press the marking on the cover
to remove it.
Front
Rear
3. Securely install the tiedown eyelet
using the lug wrench.
7-20
In Case of an Emergency
Emergency Towing
CX-7_8AS7-EA-09E_Edition2 Page382
Friday, June 5 2009 2:26 PM
Form No.8AS7-EA-09E
To Next Page
Loading...
