Mazda 2010 RX-8 - Page 272

Black plate (272,1)
NOTE
l
The Bluetooth Hands-Free system is
operable several seconds after turning the
ignition switch to the ACC or ON position
(requires less than 15 seconds).
l
If the ignition switch is turned off during a
hands-free call, the line is transferred to the
mobile telephone automatically.
l
If the mobile telephone is in a location
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth. If
communication is not possible, change the
location of the mobile telephone.
qComponent Parts
Bluetooth Hands-Free consists of the
following items:
l
Voice Recognition/Hands-Free switch
l
Information display
l
Microphone
l
Audio unit/Navigation system
Voice Recognition/Han ds-Free switch
Basic functions of Bluetooth Hands-Free
can be used for such things as making
calls or hanging up using the voice
recognition/hands-free switch on the
steering wheel.
Voice recognition/hands -
free switch (Phone button)
Voice Recognition/Han ds-Free switch
operations
A short press or a long press of the voice
recognition/hands-free switch is used to
operate the system as follows:
l
Short press (Press the button less than
0.7 sec.)
l
Long press (Press the button 0.7 sec. or
more.)
Information display
When available, the information display
shows telephone numbers, Bluetooth
Hands-Free messages, and operation
status.
Bluetooth phone connected
Microphone
The microphone is used for speaking
voice commands or exchanging
conversation.
Microphone
6-58
Interior Comfort
Bluetooth Hands-Free
RX-8_8AT5-EA-09E_Edition1 Page272
Wednesday, April 15 2009 10:33 AM
Form No.8AT5-EA-09E