EasyManua.ls Logo

Mazda 2012 CX-7 - Page 21

Mazda 2012 CX-7
523 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (20,1)
1. Adjust the seat to the desired position.
For each seat position adjustment
method, refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-5)
Height Adjustment (page 2-6)
2. While holding the SET button in, press
and hold the
button on the advanced
key/retractabl e type key until a beep
sound is heard.
The advanced key/retractable type key
is programmed after a beep sound is
heard.
Seat position memory setting procedure
To set the driver's seat to pre-program med
position, switch the ignition off, unlock
the doors using any of the following
methods, and then open the driver's door
within about 40 seconds.
l
Press the button on the advanced
key/retractabl e type key.
l
Press the request switch on a front door
or liftgate while the advanced key is
being carried.
NOTE
If any of the following occurs, the seat position
activation function cancels:
l
The / button on the advanced key/
retractable type key is pressed while the key
is not inserted into the ignition switch.
l
A seat adjustment switch is operated.
l
The vehicle starts moving.
l
The selected programming button 1, 2, or 3
is pressed.
l
Vehicle unlocking is done using the
advanced keyless functions.
l
The SET button is pressed.
Erasing memory
After the following conditions have been
met, while holding the SET button in,
press the
button on the advanced key/
retractable type key until a beep sound is
heard.
l
The ignition is switched off
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
NOTE
Memory will also be erased if any of the
following operations are performed:
l
The advanced key/retractable type key code
has been changed.
Refer to Immobilizer System (with
Advanced Key) on page 3-45.
Refer to Immobilizer System (without
Advanced Key) on page 3-49.
l
The vehicle battery is disconnected for
vehicle maintenance or other reasons.
qLumbar Support Adjustment
To increase the seat firmness, pull the
lever forward. Push the lever backward to
decrease firmness.
2-8
Essential Safety Equipment
Seats
CX-7_8CG4-EC-11J_Edition1 Page20
Monday, October 3 2011 11:11 AM
Form No.8CG4-EC-11J

Table of Contents

Related product manuals