Black plate (306,1)
4. Rotate the au dio control dial and select
the name of the programmed device
you would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of programmed devices can be
displayed. If only one device is programmed,
only the name for this device is displayed.
5. If a selection other than “GO BACK”
is made and the audio control dial is
pressed, “SURE ? NO” is displayed.
6. Rotate the au dio control dial clockwise
and switch the display to “SUR E ?
YES”.
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
-Clockwise: “SURE ? YES” displayed
-Counterclockwise: “SURE ? NO” displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select “GO BACK” and press the audio
control dial to return to the “PAIR DELETE ”
display.
8. “PAIR DELETED” is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete the
programmed device, “Err” flashes for three
seconds, and then the screen returns to the
normal display.
Bluetooth
®
audio device information
display
1. Using the audio control dial, select the
pair device infor mation display mode
“DEVICE INFO” in the “BT SETUP”
mode. (Refer to “Bluetooth
®
audio
device set-up” for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
®
unit
device is displayed.
6-68
Interior Comfort
Bluetooth® Audio
CX-7_8CG4-EC-11J_Edition1 Page306
Monday, October 3 2011 11:14 AM
Form No.8CG4-EC-11J
To Next Page
Loading...
