Black plate (260,1)
NOTE
l
If the AUTO switch is pressed while the
front A/C switch is off, the rear air
conditioning operates only to circulate air.
l
Setting the temperature to the maximum
high or low will provide the desired
temperature at a faster rate.
l
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
l
When the rear air conditioner is controlled
to the same setting as the front air
conditioner, “SYNC” is displayed on the
rear screen.
Operation from rear seats
1. Turn the front air conditioning on.
2. Press the AUTO switch. The selection
of the airflow mode and airflow
amount will be automatically
controlled.
3. Use the temperature control switch to
set the desired temperature.
NOTE
l
If the AUTO switch is pressed while the
front A/C switch is off, the rear air
conditioning operates only to circulate air.
l
Setting the temperature to the maximum
high or low will provide the desired
temperature at a faster rate.
l
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
l
When the rear air conditioner is operated
automatically, “AUTO” is displayed on the
rear screen.
l
When the rear air conditioner is controlled
to the same setting as the front air
conditioner, “SYNC” is displayed on the
rear screen.
4. To turn off the system, press the OFF
switch.
6-16
Interior Comfort
Climate Control System
CX-9_8AU3-EC-09G_Edition1 Page260
Monday, July 13 2009 7:10 PM
Form No.8AU3-EC-09G
To Next Page
Loading...
