Black plate (24,1)
Removal/Installat ion
To remove the head restraint, pull it up
while pressing the stop-catch.
To install the head restraint, insert the
uprights into the holes while pressing the
stop-catch.
WARNING
Always drive with the head restraints
set up when seats are being used and
make sure they are properly set up:
Driving with the head restraints not
set up is dangerous. With no support
behind your head, your neck could be
seriously injured in a collision.
2-12
Essential Safety Equipment
Seats
CX-5_8CA5-EA-11L_Edition1 Page24
Monday, December 12 2011 11:29 AM
Form No.8CA5-EA-11L
To Next Page
Loading...
