Black plate (475,1)
Item Feature Factory Setting Available Settings
Auto headlight off
*2
The time required for headlights to turn off
after ignition is switched off can be changed
30 seconds
0 seconds/60
seconds/90
seconds/120 seconds
Auto-light control
The headlight illumination on/off timing based
on surrounding lightness/darkness can be
changed
Medium
Light/Medium
Light/Medium
Dark/Dark
For the function setting procedure, Refer to Setup on page 5-55.
*1 Setting changes using the door-lock switch can also be done. Refer to Auto Lock/Unlock Function on page
3-13.
*2 If the setting is changed to 0 seconds, the following operation is performed according to the headlight switch
position:
l
At position: Headlights turn off immediately after the ignition is switched off.
l
At any position other than : Headlights do not turn off after the ignition is switched off.
The following “Personalization Features” are available. These settings can only be changed by an Authorized
Mazda Dealer.
Item Feature Factory Setting Available Settings
Turn indicator
The turn indicator beep volume level can be
changed
High Low
Lights-on reminder
The volume of the lights-on reminder warning
alarm can be changed
High Low/Off
Blind Spot
Monitoring (BSM)
system
The volume of the BSM warning beep can be
changed
High Low/Off
Personalization Features
9-9
CX-5_8CA5-EA-11L_Edition1 Page475
Monday, December 12 2011 11:33 AM
Form No.8CA5-EA-11L
To Next Page
Loading...
