Mazda 2015 CX-9 - Page 290

Black plate (290,1)
NOTE
l
If the AUTO switch is pressed while the
front A/C switch is off, the rear air
conditioning operates only to circulate air.
l
Setting the temperature to the maximum
high or low will not provide the desired
temperature at a faster rate.
l
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
l
When the rear air conditioner is controlled
to the same temperature setting as the front
air conditioner for the driver's side,
“SYNC” is displayed on the rear screen.
Operation from rear seats
1. Turn the front air conditioning on.
2. Press the AUTO switch. The selection
of the airflow mode and airflow
amount will be automatically
controlled.
3. Use the temperature control switch to
set the desired temperature.
NOTE
l
If the AUTO switch is pressed while the
front A/C switch is off, the rear air
conditioning operates only to circulate air.
l
Setting the temperature to the maximum
high or low will not provide the desired
temperature at a faster rate.
l
When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.
l
When the rear air conditioner is operated
automatically, “AUTO” is displayed on the
rear screen.
l
When the rear air conditioner is controlled
to the same temperature setting as the front
air conditioner for the driver's side,
“SYNC” is displayed on the rear screen.
4. To turn off the system, press the OFF
switch.
6-16
Interior Comfort
Climate Control System
CX-9_8DU1-EA-14H_Edition1 Page290
Thursday, June 5 2014 4:18 PM
Form No.8DU1-EA-14H